Setting up your Linux Fedora computer to connect to My Private Network’s VPN should take just a few minutes using our OpenVPN application. Our app connects to the VPN via the SSL protocol. Please note that your Linux Fedora computer needs to be connected to the Internet and able to browse the web before moving on with the instructions below. The steps below are for Linux Fedora 28 but the steps should apply to most RPM based Linux systems.
Using a different version of Linux? Select your correct Linux distro for the SSL OpenVPN setup below:
Linux Ubuntu OpenVPN Setup
Linux Mint OpenVPN Setup
Not yet registered? It’s quick and easy, Sign Up now!
Check Internet Connectivity
Make sure your system is connected to the internet and that you are able to browse the web. To check your location, please go to our IP Info page.
This shows the IP Address and country that you are currently connecting from, in this example, the user is connecting from Singapore.
Download Configuration File(s)
Download the OpenVPN configuration files from the link below. Please choose the appropriate configuration(s) based on your plan. i.e. If you’re subscribed to our U.K plan, you will need to download our MPN_GBR.ovpn configuration file. You can check what file corresponds to which server from our list here.
Note: If you wish to use our Free service, the configuration file that you need to use is MPN_FRE.ovpn and your connection will be rotated between different countries we have in our Free VPN cluster.
OpenVPN Configuration file(s) Download
Note: You may need to right click on the link(s) and choose Save Link As to save the file(s) on your system.
Installing Configuration File(s)
Head back to your desktop and select the Network Manager icon in the top right hand corner and choose Settings.
From the Settings menu, choose Network at the left side.
At the Network options, Click the + (Plus) button to create a VPN connection.
Select Import from file.
Now, select the VPN configuration file(s) that you’ve downloaded earlier and click on Open. In this example, I’ve downloaded our MPN GBR file.
Enter your VPN Username and Password
You are now required to enter your VPN username and Password.
Once you’ve entered them, please click on Add.
Enabling VPN Connection
Now start the VPN connection by clicking on the Network Manager icon again, and click on VPN and click on Connect.
After a few moments, the Network Manager icon should now have a little padlock icon on it to indicate that the VPN is now connected.
Check your IP Address
If you now check your IP address again from the IP Info page, your location should show that you are now in the U.K (or which ever country you have connected to).
Note: the server IP address and country name will vary depending on the server or country you are connected to.
That’s it! You are now connected. All your internet traffic will now be transmitted securely via our VPN servers through the country you had configured.
Unfortunately it doesn’t always go to plan! If you have any problems or can’t get connected, first please reboot your system and see if that resolves the problem.
Failing that, please type this command into your Terminal and run the VPN to gather your connection log:
tail -f /var/log/syslog